Thermon PCA-COM Manual de usuario descargar pdf (Pagina 3)

1.2. Slide expediter toward pipe and secure

cap to base with the captive screws.

1.3. Mount expediter to pipe using two (2)

circumferential bands of 19mm (3/4”)

wide tape.

1.4. Place UL

label provided as shown,

locate on opposite side from rectangular

side opening.

Pipe Heating Cable 134N

HSX

or FLX™ Heating Cable System

Install Cable per NEC Article 427

Thermon Manufacturing Co.

100 Thermon Dr., San Marcos, Texas 78666

1-800-730-4328 PN 27400

1.5. Cutandremoveheatingcableoverjacket.

Do not cut bus metallic braid.

1.6. Separate braid strands at edge of

 overjacketandpullcablethroughopening.

1.7. Twist braid into a pigtail. Trim ends of braid.

1.1b. Two cables.

1.1c. Three cables.

PCA-COM

152mm

(6”)

Braid

Power connection for FLX -OJ cables and HSX cables. For cables with braid only, skip to Step 3.1 on page 4.

Tape Provided

Separately

UL Label

1.1a. For one, two or three cables. Insert cable

into expediter, grommet, and NPT

threaded cap.

1 2 3 4 5 6 7 8

Sin comentarios

Thermon PCA-COM Manual de usuario Pagina 3