Thermon PCA-COM Manual de usuario descargar pdf (Pagina 2)

Kit Contents . . .

Tools Required . . .

Certiﬁcations/Approvals . . .

Item Quantity Description

1 1

Expediter Assembly

Locknut

Gasket

1” NPT Threaded Cap

Grommet

Expediter Base

2 1 RTV Tube

3 1 Power Connection Boot

4 1 End Cap ET-6 (FLX-OJ and HSX Cable)

5 1 End Cap ET-8 (FLX-BC Cable)

6 1 12 AWG Green Ground Lead

7 1 End Termination Caution Label

8 1 UL Label

9 1 8 awg Splice Lug

10 1 12/10 awg Splice Lug

The following installation procedures are suggested guidelines

for the installation of Thermon’s PCA-COM connection systems.

They are not intended to preclude the use of other methods and

good engineering or ﬁeld construction practices.

Receiving, Storing and Handling . . .

1. Inspect materials for damage incurred during shipping.

2. Report damages to the carrier for settlement.

3. Identify parts against the packing list to ensure the proper

type and quantity have been received.

4. Store in a dry location.

Installation Precautions . . .

• Tominimizethepotentialforarcingandrecausedbyproduct

damage or improper installation use ground-fault protection.

The National Electrical Code (NEC) and Canadian Electrical Code

(CEC) require ground-fault protection of equipment for each

branch circuit supplying electric heat tracing.

• Installation must comply with Thermon requirements and

be installed in accordance with the NEC, CEC, or any other

applicable national and local codes.

• De-energizeallpowersourcesbeforeopeningenclosure.

• Keependsofheatingcableandkitcomponentsdrybeforeand

during installation.

• Componentapprovalsandperformanceratingsarebasedon

the use of Thermon speciﬁed parts only. User supplied power

connection ﬁttings must be listed or certiﬁed for intended use.

• The kit instructions should be used in conjunction with the

installation instructions for the heating cable and other accessory

items.

Pipe Heating Cable 134N

HSX

or FLX™ Heating Cable System

Install Cable per NEC Article 427

Thermon Manufacturing Co.

100 Thermon Dr., San Marcos, Texas 78666

1-800-730-4328 PN 27400

PCA-COM Power Connection and End Termination Kit

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Thermon PCA-COM Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Thermon PCA-COM